|Minimum Order Quantity||1 Piece|
|Standards||Conforms to:ASTM D1003/1044,ISO 1478|
|Integrating Sphere Size||154mm dia|
|Light Source||combined LED light|
|WL||400nm to 700nm|
|aperture dia||20mm/ 15mm/ 8mm/ 4mm (Select a single aperture)|
|optical geometry||Transmittance 0/Parallel light illumination, diffuse viewing|
SL HZ12 haze meter can easily achieve ASTM D1003 non-compensation method, ISO 13468 compensation method, full light transmittance, haze test. Open sample bin can be vertically and horizontally tested to accommodate more samples to be tested. The YH1200 haze meter uses a PDF array detector to meet the CIE V(λ)2 degree visual response. The compensation method can be used to measure the light transmittance and haze with high precision and repeatability.
1.Double standard ISO & ASTM
Able to meet the test standard requirements of different users, in accordance with ASTM D1003/1044, ISO 13468, ISO 14782, GB/T 2410, JJF 1303-2011, CIE 15.2, GB/T 3978,ASTM E308, JIS K7105, JIS K7361, JIS K 7136
2.Easy to operate, faster and more accurate measurement
The YH1200 haze meter is equipped with a large-size touch screen for easy operation.With a PD array detector, CIE V(λ)2 degree visual response enables high precision and repeatable transmittance and fog measurements.USB data output device for docking with laboratory system.
Independent light source detector and temperature sensor, constantly monitor light source and environmental change, ensure the reliability of test data.
4.With compensation port, so that the measurement data more accurate Meet ASTM D1003 non-compensation method, ISO 13468 compensation method, full light transmittance, fog test, provide more accurate test results.
5.Easy to measure and widely applicable to samples
Open measuring area, vertical and horizontal testing, suitable for more samples to be tested.
6.Quality control software
It provides powerful software for measuring and analyzing fog and light transmittance, which is suitable for quality monitoring and tabulated management of fog and light transmittance data in various industries. The management of users will be digitized at the PC end, the difference of fog and light transmittance will be compared, and the test report form will be generated to facilitate customer customization and management.
YH1200 haze meter is widely used in glass processing, plastic processing, film processing, screen processing, packaging industry, liquid pharmaceutical analysis and other aspects.
|Minimum Order Quantity||1 onwards|
|Type||Haze Meter CS-720|
|Spectral Response||CIE Luminosity function y|
|Minimum Order Quantity||1 onwards|
|Parameters||HAZE, Transmittance T|
|Haze Repeatability||less than 0.1|
|Standards||ASTM D1003/D1044, ISO13468/ISO14782, JIS K 7361/ JIS K 7136, GB/T 2410-08|
TH-100 haze meter is the economic model of haze meter and is designed for plastic sheets, films, glasses, LCD panel, touch screen and other transparent and semi-transparent materials haze and transmittance measurement. Our haze meter does not need warm-up during test which saves customer's time. Instrument conforms to ISO, ASTM, JIS, DIN and other international standards to meet all customers’ measurement requirement.
Ø It conforms to international standards ASTM D 1003, ISO 13468, ISO 14782, JIS K 7361 and JIS K 7136.
Ø Three kinds of light sources A, C and D65 for haze and total transmittance measurement.
Ø It can realize transmittance compensation measurement which can provide higher accuracy test result.
Ø Open measurement area, no limit on sample size.
Ø Instrument is with 5.0 inches TFT display screen with good human-computer interface.
Ø It can realize both horizontal and vertical measurement to measure different kinds of materials.
Ø It adopts LED light source whose lifetime can reach 10 years.
Ø No need to do warm-up, after instrument is calibrated, it can be used. And measurement time is only 3 seconds.Small size and light weight which makes it much easier to carry.