Gloss Meter

Product Details:

An angle of 45° is specified for the
measurement of ceramics, films, textiles and anodised
aluminium, whilst 75° is specified for paper and printed
materials.

Feeatures



* In accordance with international standard ASTMD523,
ASTMD1455, ASTMC346, ASTMC584, ASTMD2457,
DIN ENISO2813, DIN67530, ENISO7668, JISZ8741,
MFT30064, TAPPIT480, GB9754, GB/T13891, GB7706
and GB8807.
Its technical parameters conform with JJG696-2002.
* Accurate measurement, good repetitiveness.
Features
* Automatic calibration. Small in size, easy to carry.
* Intelligent design, rapid measurement.
* Able to store 254 groups of measurements.
* Applies USB, Bluetooth data output.
* Built-in lithium ion rechargeable battery.
* Backlight display, suitable for low light environment.

Additional Information:

• Delivery Time: 3-4 weeks

Product Details:

Applications

* Paint, baking varnish, coating, printing ink and other
coating materials.
* Stone, ceramic tile, section bar and other building
decoration materials.
* Paper, Bamboo wood, plastic, film and so on.
* Other kinds of metallic and non-metallic materials

Features

In accordance with international standard ASTMD523,
ASTMD1455, ASTMC346, ASTMC584, ASTMD2457,
DIN ENISO2813, DIN67530, ENISO7668, JISZ8741,
MFT30064, TAPPIT480, GB9754, GB/T13891, GB7706
and GB8807.
Its technical parameters conform with JJG696-2002.
* Accurate measurement, good repetitiveness.
* Automatic calibration. Small in size, easy to carry.
* Intelligent design, rapid measurement.
* Able to store 254 groups of measurements.

* Applies USB, RS-232, Bluetooth data output.
* Built-in lithium ion rechargeable battery.
* Backlight display, suitable for low light environment.

Material and angle selection recommended:
* High gloss paint, printing ink, plastics, paper and other
materials. Use the angle of 20°.
* Middle gloss paint, printing ink, plastics, ceramics,
marble and other materials. Use the angle of 60°.
* Low gloss paint, camouflage coatings materials.
Use the angle of 85°.

Additional Information:

• Delivery Time: 3-4 weeks

Product Details:

Gloss meter features with 20, 60 and 85 Degree angle, manufactured according to ISO2813 and GB/T 9754. It is also compatible with international standards of ASTM D523, ASTM D2457. HG268 conforms to JJG696 first class gloss meter working requirement, corresponding with CIE 1931(2 Degree) under CIE C light source.

Features

20, 60 and 85 Degree in one from high to low gloss - have the specified angle on hand

Concise appearance, feel good

Display 5 sets of measurement data, good for comparison

Built-in lithium ion rechargeable battery

Basic model measurement can meet basic glossiness testing requirements

Connect to PC, more extend functions

One button for all angles measurement at the same location

Comply with international standards

Stable performance, easy to read data.

Specification

Measuring Angle20 Degree/60 Degree/85 Degree

Comply with standard ISO 2813, GB/T 9754, ASTM D 523, ASTM D 2457Measuring Area (mm)20 Degree 10x10 60 Degree 9x15 85 Degree 5x36Measuring Range20 Degree0~1000GU 60 Degree0~1000GU 85 Degree0~160GUDivision Value0.1GUMeasurement Range

Repeatability

Reproducibility0-10GU 10-100GU 100-1000GU

+- 0.1GU +- 0.2GU +- 0.2%GU

+- 0.2GU +- 0.5GU +- 0.5%GUMeasurement StandardConform with JJG696 first class glossmeter working requirementChromaticity CorrespondingCorresponding with CIE 1931(2 Degree) under CIE C light sourceErrors+-1.5 , +- 1.5%LanguageChinese/EnglishBattery3200mAh Li-ion Battery >10000 times(within 8 hours)StorageBasic mode 1000SoftwareGQC6 Quality Control Software with QC report printing functions and more extended functions.HumidityStandard AccessoriesPower Adapter, USB cable, User Manual, GQC6 software CD (except HG60S), Calibration PlateOptional AccessoriesMiniature Printer

Product Details:

20°,60°,85° Three angle

Gloss meters are mainly used in the surface gloss measurement for paint, plastic, metal, ceramics, building materials and so on. Our gloss meter conform to the DIN 67530, ISO 2813, ASTM D 523, JIS Z8741, BS 3900 Part D5, JJG696 standards and so on.

Product Introduction

1). High Precision

Our gloss meter adopts sensor from Japan, and processor chip from the US to ensure high precise of the measured value.

It conforms to JJG 696 standard for first class gloss meters. Every instrument has metrology accreditation certificate from State Key Laboratory of modern metrology and testing instruments and Engineering center of the Ministry of Education in China.

 

2).Super Stability (Patent Right No.: ZL2012201796876)

Every gloss meter made by us has done the following test:

412 calibration tests;

43200 stability tests;

110 hours of accelerated aging test;

17000 vibration test

 

3). Comfortable Grab Feeling

The shell is made by Dow Corning TiSLV material, a desirable elastic material. It is resistant to UV and bacteria and do not cause allergy. This design is for better user experience

 

4).Large Battery Capacity

We fully utilized every space of the device and specially custom made advanced high density lithium battery in 3000mAH , which ensures continuous testing for 54300 times.

Product Details:

SL GL206E gloss meter features with 60 Degree angle, manufactured according to ISO2813 and GB/T 9754. It is also compatible with international standards of ASTM D523, ASTM D2457.

 

SL GL206E gloss meter is widely used to test glossiness in these industries, such as automobile, paint, ink, stoving varnish, coating, wood products; marble, granite, vitrified polished tile, pottery brick and porcelain; plastic, paper; hardware industries, etc.

 

Features

• 60 Degree angle for semi gloss
• Concise appearance, feel good
• Display 3 sets of measurement data, good for comparison
• Built-in lithium ion rechargeable battery
• Basic model measurement can meet basic glossiness testing requirements
• One button for all angles measurement at the same location
• Comply with international standards
• Stable performance, easy to read data.

 

Specification

 

Product Details:

Gloss meters are mainly used in the surface gloss measurement for paint, plastic, metal, ceramics, building materials and so on. Our gloss meter conform to the DIN 67530, ISO 2813, ASTM D 523, JIS Z8741, BS 3900 Part D5, JJG696 standards

Product Introduction

1). High Precision

Our gloss meter adopts sensor from Japan, and processor chip from the US to ensure high precise of the measured value.

It conforms to JJG 696 standard for first class gloss meters. Every instrument has metrology accreditation certificate from State Key Laboratory of modern metrology and testing instruments and Engineering center of the Ministry of Education in China.

 

2).Super Stability (Patent Right No.: ZL2012201796876)

Every gloss meter made by us has done the following test:

412 calibration tests;

43200 stability tests;

110 hours of accelerated aging test;

17000 vibration test

 

3). Comfortable Grab Feeling

The shell is made by Dow Corning TiSLV material, a desirable elastic material. It is resistant to UV and bacteria and do not cause allergy. This design is for better user experience

 

4).Large Battery Capacity

We fully utilized every space of the device and specially custom made advanced high density lithium battery in 3000mAH , which ensures continuous testing for 54300 times.

Product Details:

Product Features:
1. Elegant Design combined with aesthetics and ergonomics;
2. with auto-calibration function;
3. Meet the first grade requirements of JJG696;
4. Large storage to save over 35000 data;
5. Auto Power-off within optional 30-120 seconds;
6. Comply with ISO2813, ASTM523, and GB/T9754;
7. With PC software for quality report, more extend functions;
8. with multi working modes and multi-functions for most customers’ requirements.

Product Details:

Tri angle Gloss meter 
20 60 85 degree angle Gloss measurement