Spectra Labtech
Mumbai, Maharashtra
GST No. 27ADZPD4632M1ZY
TrustSEAL Verified
Call 08037429674
77% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 onwards |
| Brand | BEVS |
| Stroke Length | 0-15 mm |
| Accuracy | +/-0.01 mm |
| Camera | Colorful CCD |
| Light Source | LED |
| Max Panel Width | 70 mm |
| Max Cupping Force | 15KN |
| Power Supply | 230 VAC-50 Hz (110V-60Hz option) |
| Touch screen | Yes |
| Camerat | Yes , captures image and video |
| User friendly | can store captured image & video on USB |
| Auto Zero position | Yes |
BEVS Automatic Cupping Tester is an advance technology to efficiently assess the elasticity and cupping resistance of various coatings, with a new generation micro-electro and CCD technology, also has strong functions such as can be video or photo the deformation process or result that can be copied the image to U disk and then connect with PC to analyse the various factors between coating performance and substrate etc.
Customized design software operation system and provide the USB port for mouse and U disk and camera, best choice for R&D and QC people.
The test is either used as a "pass/fail" test by prest to a specified depth or defining the minimum depth at which a coating fails by gradually increasing the indentation, or carry out the deformation by indetation under standard conditions.
Features
Technical Specification
Additional Information:
Product Details:
| Brand | BEVS |
| Panel Size | Width 75mm |
| Input Voltage (V) | 110/230V AC,50/60Hz (Optional) |
| Power Supply | 500W |
| Dimension | 550L x 410W x 520H mm |
| Sample Thickness | 0.5 - 20 mm |
| Standard Load Range | 5 - 50N |
| Special Load Range | 1 - 10N (Optional) |
| Cutting Stroke Length | 45 mm |
| Cutting Speed | 2 - 20mm/s |
| Cutting Space | 1-5 mm |
| Scratch Stylus | 0.5/1.0/ 2.0 mm |
| Pencil | 9B - 9H |
This instrument enables to test the scratch resistance performance, adhesion performance, hardness and linear and rotation abrasion on the coating. It has an automatic sample locking test platform, rotation and movement, test pressure adjustment and speed adjustment can be achieved.
With the improvement of product quality and QC frequency increasing, the traditional manual test method will be replaced by intelligent, automated method, to avoid human error caused by the operator.
BEVS 2205 provides fast and accurate test results for companies which have batch testing requirement, R&D department and testing organizations.
Product Details:
| Minimum Order Quantity | 1 onwards |
| Brand | BEVS |
| Size/Dimension | 30 x 20 cm |
| Standards | BS3962-6 |
| I Deal In | New Only |
| Packaging Type | Box |
| Application | Industrial |
BEVS 2203 Multi-hatch Gauge is designed and manufactured according to BS3962-6 standard with the convenient and simple feature. It''''s widely used to measure the coating film adhesion of plastic and wood.
Features
Adhesion
Opacity
Wet film thickness
Edge roughness of sharp corner
Cross cutting line
Order Information
BEVS 2203 Multi-hatch Gauge
Product Details:
| Minimum Order Quantity | 1 Number |
| Brand | imported |
| Application | Industrial |
| Warranty | 1 Year |
| Standards | ISO 2409-1992, GB/T9286-98, BS 3900 E6 and ASTM D3359 |
| Blades | 6-11 |
| Cross cut | Cross cutting line |
| Wet film thickness | Available |
Cross Hatch Cutter is designed and manufactured according to ISO 2409-1992, GB/T9286-98, BS 3900 E6 and ASTM D3359 standards.
Technical Specification
Cutting Head No.Gap(mm)BladesCutters EdgesCoating Thickness(m)BEVS 2202/11680~60BEVS 2202/211180~60BEVS 2202/31.5680~60BEVS 2202/426861~120BEVS 2202/6368121~250
Order Information
Standard KitContainBEVS2202/1C
Cross Hatch Cutter
+
Carry Case
+
Hexagonal Screwdriver
+
Brush
+
Magnifier
+
Tape
BEVS2202/2CBEVS2202/3CBEVS2202/4CBEVS2202/6CSimple KitContainBEVS 2202/1SCross Hatch Cutter
+
Paper Box
+
Hexagonal Screwdriver
BEVS 2202/2SBEVS 2202/3SBEVS 2202/4SBEVS 2202/6S
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand | Imported |
| Model | 2202 |
| Application | Industrial |
| Blades | 6 / 11 |
| Contains | Cross Hatch Cutter,Hexagonal Screwdriver,Paper Box |
| Cutter Edges | 8 |
| Gap | Gap 1,1.5,2,3 mm |
Cross Hatch Cutter BEVS 2202 is designed and manufactured according to ISO 2409-1992, GB/T9286-98, BS 3900 E6 and ASTM D3359 standards.
Technical Specification:
Cutting Head No.Gap(mm)BladesCutters EdgesCoating Thickness(µm)BEVS 2202/11680~60BEVS 2202/211180~60BEVS 2202/31.5680~60BEVS 2202/426861~120BEVS 2202/6368121~250
Order Information :
BEVS 2202/2CBEVS 2202/3CBEVS 2202/4CBEVS 2202/6CSimple KitContainBEVS 2202/1S
Cross Hatch Cutter
Paper Box
Hexagonal Screwdriver
BEVS 2202/2S BEVS 2202/3S BEVS 2202/4S BEVS 2202/6S
Additional Information:
Product Details:
| Minimum Order Quantity | 1 onwards |
| 3 in one | 1 mm , 2 mm , 3 mm in one instrument- Triple blade type |
| 1 mm | 11 Blades |
| 2 mm | 11 Blades |
| 3 mm | 6 Blades |
| Standards | As per ISO 2409-1992, GB/T9286-98, BS 3900 E6 and ASTM D3359 standards |
| Spacing | 1 mm / 2 mm / 3 mm |
| Cross Hatch Cutter | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Complies with BS 3900;E6, ASTM D 3359, BS/DIN EN ISO 2409.
This cutter is used for determining the parallel groove adhesion of one or many coating layers on a substrate, generally a metal panel. Cutter are available in 2 different blade versions, one is a multi-cut blade with 6 cutting edges, another has one cutting edge. The Cross-Cut Tester blades are made of hardened steel alloy. The blades are designed for retaining a sharp cutting edge and reduce the frequency of blade replacement. To choose a right cutter.
Operation When using the 1mm spacing with 6 tooth blades, with the knife edges downward, pull the tool over the painted surface being tested; scratching the coating to the bottom. A second crosswise cut (at an angle of 45° or 90°) will produce a ruled area comprising 25 squares or diamonds. Evaluate the appearance or behavior of the coat of paint after some vigorous strokes with the stiff brush provided, or scratching with a fingernail (partial or complete flaking or peeling, no change, etc.). Also note the condition of the substrate (sand-blasted, primed or with a prime coat, degreased, pickled, etc.). Ordering.
Comes complete with: Cross-Cut Tester kit with blade Magnifier Cleaning brush Plastic carrying case operating instructions one roll of adhesive tape |
|||||||||||||||||||||||||||||||||||||||||||||||||||||
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand | SL |
| Operating Range | 0-3200 PSI |
| Accuracy | +/- 2% PSD |
| Head type | standard Manual |
| Operating Range Mps | 0-22 |
| Standards | Complies with AS 1580.408.5, ASTM D 4541, EN 13144, ISO 4624, ISO 16276-1, JIS K 5600-5-7, NF T30-06 |
Additional Information:
Product Details:
| Brand | BEVS |
| Battery Type | 12.6V2A, 20000mA/H |
| Dimension | 210x90x140 mm |
| Charging Time | 2-3 Hours |
| Net Weight | 3 kg |
At present, cross cut method is used for qualitative evaluation of coating adhesion, but not quantitative testing. With quality control to improve and the development of new material, more and more users want to have the quantification on the adhesion and cohesion between coating and substrate, meanwhile, also need to monitor the influence change of adhesion of anti-corrosion coating on some outdoor concrete based coating, marine coating and bridge coating by the environmental temperature and humidity.
BEVS 2201 Automatic Pull Off Adhesion Tester adopts the full touch screen technology, It enables to test the adhesion of metal and other substrate and temperature and humility on the surface to further evaluate the coating quality and lifetime.
BEVS 2201ATV Adhesion Tester Verifier is used to verify the accuracy of the pull-off tester. It is of exquisite design and digitally displays force value.
Technical Specification
| Dolly Diameter | 10 mm | 14mm | 20mm | 50min |
| Waning range | 8-100MPa | 4-50MPa | 2-25MPa | 2-32MPa |
| (1200-14000W | (600-7200p50 | (300-3600ps0 | (50-5800.0 | |
| Range of poll off rate | 0.4-5.5MPais | 0.2-2.8MPais | 0.1-1.4MPats | 0.02-0.22MPa/s |
| (58-812psits) | (29-4030000) | (15-2030effM | (2-32PodM |
Features
Product Details:
| Brand | BEVS |
| Automation Grade | Automatic |
| Material | Stainless Steel |
| Condition | New |
| Diameter (mm) | 15 mm |
| Application | Industrial |
BEVS Impact Tester is used to make the reliable evaluation of coatings resistance by simulating actual impact condition.A free falling object impacts coated surface and lead to craze in the substrate,test the destroy degree of crazing.
Most of coating in protective field must be carried out the impact test, such as painting, plating, plastic, varnish, resin, compound, coil coating, sheet and metal material etc.
Instrument including
Technical Specification
BEVS 1601/1 Impact Tester
BEVS 1601/2 Impact Tester
BEVS 1601/3 Impact Tester
BEVS 1601/5 Impact Tester
BEVS 1601/4Impact Tester
Product Details:
| Minimum Order Quantity | 1 Unit |
| Usage/Application | Bending test |
| Size | 280x280x95 mm |
| Gross Weight | 8 kg |
| Size of Cone Axis | Small End 3.1,Big End 38,Length 203 mm mm |
| Sample Size | 200x100 mm |
| Brand | BEVS |
Features
Product Details:
| Minimum Order Quantity | 1 Unit |
| Usage/Application | bending Flexibility |
| Brand | Spectra Labtech |
| Size | 300 300 190mm L W H |
| Automation Grade | Manual |
| Quantity Per Pack | 1 |
| Weight | 50kg |
| specifications | DIN EN ISO 17132, ASTM D 4145, EN-13523-7 |
T-Bend Tester is designed to evaluate the flexibility and adhesion of an organic coating on a metallic substrate by observing the cracking or loss of adhesion when a coated test panel is bent.
|
Coated panels are bent back on themselves to 180º, with the coated surface on the outside of the bend, at progressively less severe radii of curvature, the radii of curvature being defined by Spacers or mandrels. After bending, each panel is examined with a magnifying glass for cracking of the coating and by a tape pull-off test for loss of adhesion of the coating. The minimum diameter to which the test panel can be bent without cracking or loss of adhesion, i.e. when failures on longer occur, is taken as the T- bend rating.
Confirms to DIN EN ISO 17132, ASTM D 4145, EN-13523-7 (Paints & varnishes T-bend test).
|
|||||
Product Details:
| Material | Stainless Steel |
| Maximum Sample Width | 70mm or 100mm |
| Sample Thickness | 0.3 ~ 1 mm |
| Mandrels with Diameter | 2,3,4,5,6,8,10,12,13,16,19,20,25 and 32mm |
| Standard | ASTM D522 |
| Brand | BEVS |
A very robust mechanical unit for determining the elasticity, adhesion and elongation of dry paint on metal sheet.
Perfect design, the instrument can be adapted to the diameter of the mandrel used.
The coated specimens up to 70mm width, are bent perfectly and regularly on decreasing mandrels until cracks can be observed.
Each instrument is supplied with a kit of 14 stainless steel mandrels with diameters of 2, 3, 4, 5, 6, 8, 10, 12, 13, 16, 19, 20, 25 and 32 mm.
